EMT 90° Elbow

Elbows

The EMT 90° elbow turns an EMT steel conduit run through a right angle. It suits runs that change from straight to vertical or horizontal, keeping the layout neat and installation easier.

EMT 90° Elbow

Available from 1/2 in. to 2 in. for 90-degree conduit turns, making direction changes at wall corners and on site easy and neat while adding safety, strength and a tidy finish to the wiring system.

Product and Size Information
Product type	:	EMT 90-degree elbow
Elbow angle	:	90°
Supported conduit sizes	:	Match the EMT conduit size, e.g. ½, ¾, 1, 1¼, 1½ and 2 in.
Bend radius (R)	:	102-241 mm for sizes 16-53 mm
Straight end length (Ls)	:	38-86 mm for sizes 16-53 mm
Compatibility	:	Use with EMT conduit; choose a size that matches the conduit and fittings.
Standards	:	TIS 770-2567

Size Table

EMT 90° Elbow Size Table

Thread Data

Scroll the table sideways to see all data

Size (in.)	Threads per Inch	Pitch Diameter at End of Thread E0 (mm)	Length of Thread (mm)		Outside Diameter H1 (mm)	Min. Coupling Length H2 (mm)
Size (in.)	Threads per Inch	Pitch Diameter at End of Thread E0 (mm)	Effective L2	Overall L4	Outside Diameter H1 (mm)	Min. Coupling Length H2 (mm)
½"	14	19.30	13.50	19.80	25.70	41.30
¾"	14	24.60	14.00	20.10	31.80	41.70
1"	11½	30.80	17.30	24.90	38.70	50.00
1¼"	11½	39.50	18.00	25.70	47.50	51.60
1½"	11½	45.60	18.30	26.20	54.70	52.40
2"	11½	57.60	19.30	26.90	67.30	54.00

Bend Radius and Straight End Length

Scroll the table sideways to see all data

Size (mm)	Min. Radius (R) (mm)	Min. Straight End Length (Ls) (mm)
16	102	38
21	114	38
27	146	48
35	184	51
41	210	51
53	241	51

EMT 90° Elbow Features

Changes the direction of EMT conduit runs by 90 degrees.
Designed for EMT conduit of the same size; the connection method depends on the elbow end type and fittings.
Made of lightweight metal that is easy to install, for indoor electrical conduit runs.
Lets conduit turn corners or change between up and down runs neatly.
Removes on-site conduit bending for faster installation.
Protects the wires inside and, when used correctly, reduces wire snagging at turns.
Suited to indoor electrical runs and areas where conduit needs a right-angle change of direction.
Standards: TIS 770-2567

Request a Quote

How to Use

Choose an EMT 90° elbow that matches the conduit size in use.
Measure and plan the conduit route to suit the site before installing.
Connect the elbow ends to the EMT conduit using fittings suited to the model.
Secure the connections and install conduit clamps as appropriate.
Before pulling wires, check the run and the inside of the elbow for sharp edges that could damage insulation.