IMC 45° Elbow

Elbows

The IMC 45° elbow changes the direction of an IMC steel conduit run by 45 degrees and is used with IMC conduit. It adapts the run to the site, removes on-site bending and keeps the wiring system tidy.

IMC 45° Elbow

Available from 1/2 in. to 4 in. for 45-degree IMC conduit turns. Built as strong as IMC conduit itself, it keeps runs neat, simplifies installation and improves the safety of the wire protection system.

Product and Size Information
Product type	:	IMC 45-degree elbow
Elbow angle	:	45°
Supported conduit sizes	:	Match the IMC conduit size, from ½ in. to 4 in.
Compatibility	:	Use with IMC conduit; choose a size that matches the conduit and fittings.
Standards	:	TIS 770-2567

Size Table

IMC 45° Elbow Size Table

Thread Data

Scroll the table sideways to see all data

Size (in.)	Threads per Inch	Pitch Diameter at End of Thread E0 (mm)	Length of Thread (mm)		Outside Diameter H1 (mm)	Min. Coupling Length H2 (mm)
Size (in.)	Threads per Inch	Pitch Diameter at End of Thread E0 (mm)	Effective L2	Overall L4	Outside Diameter H1 (mm)	Min. Coupling Length H2 (mm)
½"	14	19.30	13.50	19.80	25.70	41.30
¾"	14	24.60	14.00	20.10	31.80	41.70
1"	11½	30.80	17.30	24.90	38.70	50.00
1¼"	11½	39.50	18.00	25.70	47.50	51.60
1½"	11½	45.60	18.30	26.20	54.70	52.40
2"	11½	57.60	19.30	26.90	67.30	54.00
2½"	8	69.10	29.00	39.90	82.60	81.00
3"	8	84.90	30.50	42.40	98.30	84.10
3½"	8	97.50	31.80	42.70	111.10	86.50
4"	8	110.10	33.00	43.90	123.80	89.30

IMC 45° Elbow Features

Changes the direction of IMC conduit runs by 45 degrees.
Designed for IMC conduit of the same size; the connection method depends on the elbow end type and fittings.
Made of strong, durable metal for electrical installations that need robustness.
Makes runs around wall corners or tight spaces easy and neat.
Removes on-site conduit bending for faster installation.
Protects the wires inside and makes changing the run direction easier.
Suited to outdoor electrical runs and areas where conduit needs a 45-degree change of direction.
Standards: TIS 770-2567

Request a Quote

How to Use

Choose an IMC 45° elbow that matches the IMC conduit size in use.
Measure and plan the conduit route to suit the site before installing.
Connect the elbow to the IMC conduit using fittings suited to the model.
Secure the connections and install conduit clamps as appropriate.
Before pulling wires, check the run and the inside of the elbow for sharp edges that could damage insulation.